No spacer fasteners are compatible with composite, hardwood, treated (including ACQ treated lumber), cedar, redwood and vinyl deck boards.
No spacer fasteners make the installation of first and last deck board easy. The no spacer fastener also provides a fast and clean installation solution for stair construction. (please note, fastener orders with spacer include a small quantity of no spacer fasteners)
When using the no spacer fastener with natural wood deck boards (treated, cedar and redwood lumber), please take into consideration that manufacturer field testing and contractor feedback has shown on average the deck board will shrink about 1/16".
The Invisi-Fast No Spacer Kit comes in either a 100 or 500 piece kit.
The 100 piece kit will cover approximately 60 square feet of decking (depending on joist spacing - 12" or 16"). Each kit includes 300 ACQ compatible or stainless steel screws and one square drive bit.
The 500 piece kit will cover approximately 300 square feet of decking (depending on joist spacing - 12" or 16"). Each kit includes 1,500 ACQ compatible or stainless steel screws and one square drive bit.
It is recommended to use 1" or 1-1/8" screws depending on the measurement of your deck boards. If your deck boards measure 3/4" thick, use 1" screws. If your deck boards measure 7/8" thick or more, use 1-1/8" screws.
(sold as a kit in quantities of 100 or 500)